It is said that talent will make its way, even if it leads abroad. So, you are a talent, and you are determined to shine in this capacity. And not just anywhere, but in Europe. Where to begin? - of course, from the good art university. In the Czech Republic, three Prague higher schools have long been in the best creative universities: Academy of Fine Arts(Akademie výtvarných umění v Praze - AVU), Higher School of Applied Arts(Vysoká škola uměleckoprůmyslová v Praze - VŠUP) and Academy of Performing Arts(Akademie muzických umění) with its three glorious faculties - theater DAMU, cinematography FAMU and music HAMU. E These universities enroll a limited number of students - 5-6 per course, so every “one-of-a-kind” student is doomed to become a star. It is difficult to get into these universities, but talent and courage overcome any fortress.
The offer of creative specialties at Czech public and private universities is wide and varied. You can get both a creative specialty and art history, study classical art or applied art. Employees language school Czech Prestigewill help you choose a faculty and specialty according to your skill and talent from almost 50 universities and faculties teaching creative specialties (half of them are state-owned). You should remember only one feature of creative universities - the deadlines for admission. The sleigh and admission to an art university must be prepared in the summer. Because admission to these universities begins in the fall. Before this time, it is advisable to have time to create a portfolio - usually universities require 15-20 homework. If you are an artist, and not only at heart, but also in reality, it’s time to think hard about choosing a specialization and faculty. There is time. We offer a small selection of universities offering the popular specialty “Graphics and Design”. You can order a complete list at a language school with the right to take the state exam Czech Prestige.
Graphics and design
Prague College, Prague
Specialty "Graphic Design" (BA ), training in English.
For admission you need:
- English language proficiency certificate;
- motivation letter;
- creative portfolio.
Tuition fee: for EU residents – 129,000 CZK, for non-residents – 149,000 CZK.
Institute of ART & DESIGN, Prague
Specialty "Graphics", (Bc)
For admission you need:
- a document confirming the achieved level of education (with nostrification - for foreigners);
- presentation of creative works to the selection committee;
- written general knowledge test;
- interview.
Tuition fee: CZK 70,000.
Faculty of Education of the University of Hradec Králové
Specialty: Fine Arts and Textile Design ( Bc)
For admission you need:
- a document confirming the achieved level of education;
- homework - a portfolio containing about 20 creative works: drawings, photographs, sculptures, etc.;
- creative competition: portrait from life, artistic composition, textile sketch;
- interview on the topics: world and Czech art - history and modernity, history of the textile industry.
Free training
Faculty of Arts, University of Ostrava, Ostrava
Specialty "Graphics": graphic design, book graphics(cover design), drawing ( Bc).
For admission you need:
- 15 - 20 homework, photo documentation of homework if it is extensive;
- creative test - three tasks;
- interview on art.
Free training
Faculty of Art and Design, West Bohemian University, Pilsen
The Department of Fine Arts offers bachelor's programs:
- illustration and graphics in periodicals, educational literature;
- comics and illustrations in books, magazines, periodicals, textbooks for children;
- graphic design (wide range of applications from classical forms to electronic ones;
- visual communication;
- book and paper processing;
- graphic illustration;
- painting.
The Department of Multimedia Design offers bachelor's programs:
- multimedia;
- animation and interactive creativity;
- intermedia (combination of different visual forms)
The Higher School of Applied Arts in Prague is a university that trains specialists in the fields of fine arts, design, architecture, photography and animation.
The university was founded by Emperor Franz Joseph in 1885 under the name School of Applied Arts and belonged to the Ministry of Culture and Education. At the time of its opening, the school was the first and only educational institution in the field of arts in the Czech Republic. The directions in which students studied at that time were: architecture, sculpture, drawing, painting, working with metal, wood carving, painting of flowers, textiles.
The school building was built in 1882-1885, it was designed by František Šmoranze Jr. and Jan Mahitka, using images from art academies in Paris and Vienna. In the first years, only one wing was in use on the Alshov embankment.
At the end of the 1990s, construction began on a new VSUP building in the Prague district of Djablice, designed by Josef Pleskot.
Currently, about 300 students are studying here, and the current rector of the university is Jindrich Smetana.
Faculties and study programs
There are no faculties at the university, bachelor's degree studies after school last 4 years, master's degree after school lasts 6 years (there is no division into bachelor's and master's degrees), however, there are master's degrees for those who already have a bachelor's degree, training in this case lasts 2 years.
1. Fine arts program (bachelor’s degree after school – 4 years), specialties:
- Fine arts (painting, sculpture, mediating confrontation, photography)
2. Fine arts program (master’s degree after school – 6 years), specialties:
- Architecture
3. Fine arts program (master's program after bachelor's degree - 2 years):
- Design (industrial, furniture design, product design, glass, ceramics and porcelain, concept - object - meaning, fashion, clothing and footwear design, textiles)
- Graphics and visual communication (illustration and graphics, font creation and typography, graphic design and communication, film and TV graphics, graphic design and new media)
- Fine arts (painting, sculpture, intermedial confrontation, photography)
4. Fine arts program (master's program after bachelor's degree - 3 years):
- Architecture
5. Theory and history of fine arts (master's degree after bachelor's degree - 2 years):
- Theory and history of modern fine art
Admission
For all specialties you must pass a creative exam, which consists of two parts. The main criteria for admission are demonstration of artistic talent, motivation, a sufficient general cultural overview and the ability to further creative development and theoretical reflection of one's own work.
For all specialties, you must provide a resume and a motivation letter; the requirements for these documents depend on the specialty.
For all specialties it is also necessary to provide a certificate in Czech language at level B1.
Portfolio
Bachelor's degree after school (4 years):
Industrial Design
- It is necessary to provide a maximum of 30 of any specialized work
Furniture and interior design
- It is necessary to provide 20-30 of any specialized work
Product Design
- It is necessary to provide 15-20 of any specialized work
Sculpture
Painting
- Portfolio in the form of photographs of works - at least 20 works with an emphasis on creating your own unique work, not stylistic exercises on this topic. For each work, indicate: name, technique, size, year.
Intermedial confrontation
- It is necessary to provide 15-25 of any profile works, original drawings, work with plastic and implementation in printed form in photographs
Photo
Master's degree after school (6 years)
Architecture
Master's program after bachelor's degree (3 years):
Architecture
- The portfolio depends on the field of study. Usually it is necessary to provide 15-20 works related to architecture (projects, photographs, drawings, audio, video, models, visualizations, graphics). Requirements may vary slightly depending on the area of study.
Master's program after bachelor's degree (2 years):
Industrial design n
- You must provide a portfolio to choose from, an interview is possible
Furniture and interior design
- You must provide a maximum of 20 of any relevant work
Product Design
- You must provide a maximum of 10 of any relevant work
Sculpture
- A brief but informative description of your own work, interests and intentions in training, a structured resume, a portfolio of work over the last 3 years in the form of photographs of work
Painting
- Portfolio in the form of photographs of works - at least 20 works. For each work, indicate: name, technique, size, year. Theoretical description of one work.
Intermedial confrontation
- It is necessary to provide a portfolio of choice and annotations of exhibitions
Photo
- A brief but informative description of your own work and interests, a portfolio of your own work; of which three are projects in their original form (for example, black and white photographs, digital prints, 3D objects, mp4, mp3 or others).
How the first part of the exam goes:
- Programs – design, architecture and graphics:
The first part takes place with the participation of the candidate - a portfolio assessment by a commission and an art assignment for about half of one day.
- Other programs:
The first part (takes place remotely, without the participation of the candidate) is an assessment of the portfolio by a commission.
How the second part of the exam works:
Common for all specialties. First, an Art History Test and a General Cultural Survey Test are administered. After this, candidates must come to the university within three days and complete art assignments from teachers. Assignments depend on the chosen specialty; candidates will be informed in advance about what assignment awaits them. At the end, the commission once again evaluates the test results, portfolio and work created over three days, and an interview is also conducted.
If you have any questions regarding admission to the Academy of Fine Arts in Prague, entrance exams, specialties, open days and university admission, please contact or to our specialists.
You can also familiarize yourself with admission to Czech language preparatory courses in Prague.
Briefly about the history.
From the very beginning of its activity, this educational institution was called the School of Applied Arts; it was founded by Joseph Franz at the end of the 19th century, at the same time its first charter was adopted. At the time of its opening, it was the only educational institution that taught academic disciplines related to art. At that time it was subordinate to the Ministry of Culture and Education, and was divided into several schools. There was a general three-year school here, as well as schools where graduates continued their studies. Their training lasted from three to five years and included several specialties. Thus, those who wished could obtain the profession of an architect or sculptor; the necessary knowledge on working with metals, wood and textiles was also given here, and it was possible to master valuable skills in the field of painting, drawing and graphics.
In 1896, 11 years after the formation of the school, the administration of the educational institution changed, which led to the transfer of part of the teaching staff and a narrowing of training. But thanks to the rapid development of art in the Czech Republic, at the beginning of the 20th century it began to gain popularity again, develop the level of teaching and accept a much larger number of students, which included such talented people as Josef Gočar, Vaclav Spala, Jaroslav Ressled, Josev Capek and many others.
Nowadays.
This educational institution occupies a special place in the Czech education system. Students here receive a good theoretical basis and excellent practical skills, which help them work successfully in creative studios. This university does not stop in its development and annually attracts both Czech and foreign applicants. Over many years of improving their education system, education within these walls has been divided into several principles: local students are required to understand technical disciplines, know the theory and philosophy of art, and also be able to apply their artistic creativity in the studio. Those. Education here is given on the basis of comprehensive teaching methods, which gives all students the opportunity to gain essential knowledge in the fields of design, liberal and applied arts, as well as architecture.
Training here takes place primarily in ateliers, where students learn the basics of artistic and craft work. All the theory and skills acquired are simply necessary for the further development of young specialists; for this reason, related subjects are also taught here, which also include art theory and aesthetics. Personal development of young artists is one of the most important principles of teaching. Students must develop their conceptual thinking, not be afraid to experiment and conduct a clear analysis of any given problem.
Faculties.
It does not have the largest list of faculties and departments, this is mainly due to the previously mentioned comprehensive training, which provides an opportunity for the comprehensive development of young talents.
Applicants here can enroll in both undergraduate and graduate studies. The first includes a study period of 4 years and gives the opportunity to choose one of three areas: design, artistic creativity, as well as graphics and visual communications.
The master's program also has a number of areas. You can become a student here right after school by enrolling in the specialty “Architecture” for a period of six years. There is also the opportunity to continue studying after a bachelor's degree. Then it will be possible to obtain the specialty of an architect after 3 years, a designer - after 2, and it will also be possible to learn graphics and visual communication in a two-year period.
The Higher School of Applied Arts (HSUP or UMPRUM) is a prestigious creative higher education institution in Prague that trains specialists in the fields of fine arts, design, architecture, photography and animation.
Official name: Vysoká škola uměleckoprůmyslová v Praze (VŠUP)
City: Prague
Website: www.umprum.cz
University type: state
Language of instruction: Czech, English
Number of students: 487
Study programs: bachelor's, master's, doctoral studies
International students: 76
History of the foundation of VŠUP
The school was founded by Franz Joseph in 1885, and at that time it was the only one of its kind. The first students were taught by the most eminent artists in the Czech Republic; the director was the architect Frantisek Shranov Jr.
Since its inception, the university has been a cradle of talented artists and craftsmen. At the turn of the 19th and 20th centuries, it became one of the centers of the Art Nouveau style. Over its more than century-long history, the school has gone through many stages - the Nazi occupation, the communist coup, the suppression of the Prague Spring. All these events had a serious impact on her work, but in the end she survived and to this day remains a leader in the field of creative education in the Czech Republic.
At the beginning of March 2018, the admissions committee of the Higher School of Applied Arts summed up the results of the entrance exams and announced the names of the lucky ones who would begin their studies at UMPRUM in September.
Of the 748 applicants who submitted “invitations” to bachelor’s, “continuing” and master’s programs this year, only 160 managed to impress the leading studios and their assistants with their talent.
In total, for each of the disciplines represented in VŠUP, a maximum of 2 to 10 people were recruited.
what is needed for admission to a university in the Czech Republic
Admission to creative majors is quite different from admission to majors in any other field. Firstly, entrance exams are held not in the summer, but in the winter. Secondly, there are several stages of admission, and in addition, an author’s portfolio of works is required.
As of 2019, the school consists of 23 ateliers in 5 departments:
- Architecture
- Design
- Visual arts
- Applied arts
- Charts
The sixth department teaches in the field of art history and aesthetics.
The “highlight” of the Higher School of Applied Arts is the focus on the practical part, work in special educational studios under the strict guidance of teachers. Each year, a fairly small number of students are recruited from a large number of applicants, since the university makes it a priority for its students to be the best of the best.
How are the entrance exams for undergraduate studies at the Higher School of Applied Arts in Prague?
You can enroll in three specialties for a bachelor's degree. Each specialty includes several studios, from which the applicant must choose the most interesting for him. Training in all specialties lasts 4 years. These are the specialties:
Design
- Industrial design studio
- Furniture and interior design studio
- Product design studio
- Atelier glass
- Ceramics and porcelain studio
- Atelier K.O.Z. ---- Concept - Object - Meaning
- Fashion studio
- Clothing and shoe design studio
- Textile production atelier.
Graphics and visual communication
- Atelier of illustrations and graphics
- Printing studio
- Atelier of graphic design and visual communication
- Studio of cinematographic and television graphics
- Atelier of graphic design and new media.
art
- Sculpture
- Drawing
- Intermedial confrontation
- Photo
First of all, an application for training is submitted, popularly called an “invitation letter” (in Czech: “ppřihláška“). This must be done via the Internet on the university website before November 30 and you can only submit an application to one studio. Later, a printed version of the invitation and all the necessary documents must either be sent by mail to the student department or brought there in person. These necessary documents are a document confirming that you have paid for the application, a notarized copy of the certificate of secondary education (in the case of foreigners: its version translated into Czech), a resume and a motivation letter.
Foreigners are also required to have a certificate of passing an exam on their knowledge of the Czech language at a high level. Studies are conducted in Czech, so you need to know the language well - the competition is high, there are a lot of people willing, and no one will keep a student who barely understands what is happening around. Annual preparatory courses in the Czech language successfully prepare the applicant for the realities of studying at the university.
Then the university sends a letter containing all the necessary information about the entrance exams: where they are held, on what dates, etc. The entrance exams are divided into two stages and last one week.
At the first stage of the entrance exams, the applicant submits his portfolio in a regulated form and completes a creative task. The commission evaluates his portfolio and the quality of the completed assignment using the “pass or fail” system. Only if both parts are completed well, the applicant is admitted to the second stage. In exceptional cases, you can take exams in two studios.
At the second stage, a theoretical test is written and the portfolio and completed assignment are reviewed again. Here the works are already awarded grades and points: 12-10 (excellent), 9-7 (very good), 6-4 (good), 4-0 (failed). The quota for bachelor's degrees is 65 people.
How are the entrance exams for master's programs at VŠUP in Prague?
Master's studies last for 2 years (the only exception is the specialty “Architecture” - they study for 3 years). There are two types of master's programs at the Higher School of Applied Arts: practical and theoretical.
The practical program includes the specialties of Architecture (atelier Architecture I, Architecture II, Architecture III and Architecture IV), Design, Graphics and Visual Communication and Fine Arts. The list of ateliers for the last three specialties for the master's program is the same as for the bachelor's degree.
The theoretical program implies that you have already received a bachelor’s degree in one of the university’s specialties and want to deepen your knowledge in the theoretical part and undergo an internship in one of the studios. Therefore, there is only one specialty - “Theory and History of Contemporary Art”
The invitation must also be submitted before November 30. It must be accompanied by a document confirming payment for the application, a notarized copy of a diploma of higher education (in our case, a notarized copy of the nostrification of a diploma of higher education), a resume and a motivation letter, and a portfolio of works that is mandatory for all ateliers.
Foreigners also need to pass a Czech language exam and provide a certificate to the university.
Submitting an invitation is, in essence, the first stage of the entrance examination. The admissions committee evaluates your portfolio and motivation letter using a 12-point system: 12-10 (excellent), 9-7 (very good), 6-4 (good), 3-0 (failed). In order to qualify for the second round, an applicant must score a minimum of 7 points. In exceptional cases, he may be allowed to take part in the entrance exams of another studio.
The lucky winners receive a letter with all the necessary information about the second stage: time and location, what you can take with you, what will happen at the second stage, etc.
The second round is different for each studio, where a creative task is performed. Its results are assessed by points and a grade, which is recorded in the protocol. Based on them, the best 80 applicants will be accepted for training.
How to create the right portfolio
A well-designed portfolio greatly influences the outcome of admission. Therefore, it is important to know the requirements of different specialties.
Department of Architecture
Architecture I:
You can be creative here because there are no strict restrictions. Works simply must demonstrate your interest in the specialty and talent. The only requirement: no rolls, only work inserted between the plates, maximum A1 format. Audiovisual works in CD-DVD format.
Architecture II:
You are expected to use your portfolio to express your interests, personality, and love for architecture. Again, there are no special restrictions: these can be photographs, drawings (maximum format A1), three-dimensional objects, audiovisual works (in CD format). Number of works: 15-20.
Architecture III:
Also from 15 to 20 works, but only in printed form, maximum format A3. You can show your personal architectural projects.
Architecture IV:
From 15 to 20 works in the specialty in any technique (photography, drawing, etc.) and in any format. Audio and video on CD.
Department of Design
Industrial design studio:
Works only in printed format, maximum quantity: 30 pieces.
Furniture and interior design studio:
The portfolio should contain from 20 to 30 works in the specialty in A4-A3 format only in printed form.
Product design studio:
From 15 to 20 original works in the specialty, large 2D and 3D projects must be captured in photographs.
Department of Fine Arts
Sculpture:
Drawing:
Intermedial confrontation:
Photo:
The portfolio should contain 1-2 collections of photographs on a free topic, a photo book, only in printed version.
Department of Graphics
Studioillustrations and graphics:
From 15 to 30 works, of which a maximum of 5 drawings of figures/heads, original drawings must be provided, photographs are possible, printed versions only.
Font and typography studio:
Studiographic design and visual communications:
Studio of cinematographic and television graphics:
From 12 to 20 works in the specialty: drawings, animated films, etc. Videos can be presented on CD and DVD.
Studiographic design and new media:
Up to 20 works, preferably in A3 format, only related to the specialty. Provide 3D objects in photo documentation format. You can include audio and video in your portfolio.
Department of Applied Arts
Glass studio:
Studioceramics and porcelain:
From 15 to 20 works related to the specialty can also be in digital format (but not CD).
Atelier K.O.V -Concept-Object-Meaning:
Studiomods:
Studioclothing and footwear design:
Textile production atelier: