The BERLOGOS team has compiled its own TOP architectural courses where specialists can be trained, as well as where they could improve their qualifications and expand their professional knowledge and skills. The list includes, in our opinion, the 5 highest quality, interesting and non-standard ways to obtain a high-level architectural education in institutions that are distinguished by their thoughtfulness, scale and technology.
- 1. Open educational courses (OOC) from the Moscow Architectural Institute (MARCHI)
- open-marhi.ru
One of the best architectural universities in the post-Soviet space is MARKHI, so it is not surprising that it is there that high-quality courses have been created in the target area of training - architecture and design. OOK in architecture is a unique development of the teaching staff of the Moscow Architectural Institute, which includes the training of not only architects, but also specialists in related fields using an Internet resource, minimal costs (only tuition fees) and optimal time management. We are talking about three levels of training: pre-university, professional and post-graduate (advanced training). Education can be obtained both full-time and distance learning. In general, OOC is a form of education that is popular in the world community, where educational institutions practicing it are united in the OOC Consortium (OpenCourseWare - OCW) and work according to generally accepted standards.
- 2. "The educational center"
itstolytsa.ua
The Kiev company "Training Center" is the brightest representative among organizations that promote modern technologies and carry out the educational process precisely through IT equipment and Internet resources. Their architectural design courses are an integral component of the complete training of professional computer designers and architects. The educational process is aimed at studying software for architectural development and design. The educational process is maximally concentrated on solving practical problems, and students can clarify all the nuances of the theory in personal communication with the course teachers. The advantage of working with the “Training Center” team is that the teachers are practicing architects, and therefore are able to point out “pitfalls” and “life hacks” in the activities of specialists in this field.
- 3. University of the Arts LondonSaintMartins
Courses in architectural drawing, design and other specialized areas from the best English specialists are available even to those who physically and financially cannot afford a trip to the capital of Foggy Albion. The author's course from an Irish architect working at Saint Martin's involves studying the material through participation in online seminars after preliminary self-study at home. Small groups of people from 8 to 12 people participate in such seminars. Communication with a foreign specialist is carried out via the Internet using only a web camera. To begin training, no special education is required. Any adult, solvent person can begin training, the main advantages of which are direct dialogue with the teacher and the vastness of the material offered, both theoretical and practical. However, it is worth considering that the courses are only available to those who have 5 points in spoken and written English (IETELS certificate required).
- 4. Strelka Institute of Media, Architecture and Design
strelka.com
For the most purposeful and diversified people, this method of studying architecture, as offered at the Strelka Institute, is suitable. Architectural trends are studied by studying the characteristics of urban spaces and urbanization processes. People aged 25-35 years old who have an architectural higher education and are fluent in English with a score of 5 points, all on the same IETELS certificate, can get into training at this organization. The advantage of education lies in the highest level of training of teachers, interest in their own students, etc. Tuition is free, and students, on the contrary, receive a significant stipend. The material combines a comprehensive theoretical and practical basis.
- 5. Higher School of Environmental Design at Moscow Architectural Institute - an alternative to traditional architectural courses
design-marhi.ru
If you have always seen yourself as an architect, but were unable to subsequently connect your life with activities in this area, then the Higher School of Art and Design at the Moscow Architectural Institute is the best option to retrain without wasting time on excessively long professional training. A person of any specialization can come to this institution and gain a wealth of knowledge in the field of architectural design. Without actually changing the type of their activity, a doctor, lawyer, ballerina or any other specialist can obtain the necessary skills for professional employment in the field of architecture. The advantages of this type of architectural education are a convenient schedule, work with specialists from the supervising High School of Architecture Institute of Architecture (MARCHI), etc.
Bottom line
Considering the options for training and advanced training in the field of architecture and design proposed above, we can say that the doors of many specialized educational institutions are open to beginning and experienced architects. Naturally, you can start with free options aimed at expanding your knowledge base and only then go to those institutions where the qualification level will be confirmed by certificates and identifications necessary for the much-desired employment and start working in the field of architecture and design.
From urban eco-design to the 3D printing revolution and cities of the future, we talk about seven current online courses that will be of interest to designers and architects. All of them are free (you will only need to pay for the official certificate based on the results, and even then at will), and you can study at any convenient time.
"Creating Architecture"
International Business School of Design and Architecture in Segovia, Spain
Despite the fact that the course is primarily intended for architecture students, its simple presentation and interesting content make it accessible to anyone who is at least somewhat interested in architecture. In addition to studying the technical aspects of architecture, a considerable part of the time will be devoted to such a concept as the philosophy of architecture. The creators of the course are confident that mastering this discipline will be useful, including for graphic and industrial designers. A nice bonus: the course includes an interview with the executive director of the Pritzker Prize and the school's immediate director, Martha Thorne. The 4-week course starts on March 13th.
"City Design"
University of Pennsylvania
Each course module (there are 10 in total) will focus on a specific aspect of urban design. Topics covered include: “Ideas that Shape Cities,” “Cities in the Information Age,” “Preserving Old Cities,” “Disadvantaged Neighborhood Challenges,” and “Dream Cities.” The course is taught by professors from the University of Pennsylvania and visiting specialists. The first lesson of each module will begin with an open discussion from Professors Stefan Ahl, Jonathan Barnett and Gary Hack to introduce students to the subject. To successfully complete the course, you will need to pass three final tests. The new set starts on March 20.
"Architectural Imagination"
Harvard University Graduate School of Design
The course is designed primarily for beginners. Historians and theorists in the field of architecture will teach us to understand how architecture “works,” what are the mechanisms of its perception and how to learn not only to look, but also to see, analyze and enjoy it. The program includes ten modules, during which students will explore through examples the ability of architecture to attract, mediate and express a range of cultural aspirations in society. No pre-registration required.
"Product Design"
Delft University of Technology, The Netherlands
An archived course (no registration required, you can study the materials at any convenient time, but they will not be updated) on product design from the Delft University of Technology - this is a kind of introduction to the specialty. No manufacturing skills are required, although experience designing something is helpful. The main goal of the course is to teach the designer to be aware of the needs of users, to work meaningfully, being aware of why you are performing this or that action - this is the only way, the lecturers are sure, to achieve an ideal product design. A separate lecture will be devoted to how to correctly present the finished product to the public and teach how to competently evaluate the work of other designers.
"The 3D Printing Revolution"
University of Illinois
The main goal of the course is to explain how a 3D printer works and what can be printed with it. Using examples of already implemented projects, students are asked to imagine how the development of a new technology for creating an object can, in theory and in practice, change our lives. Course materials include informative video lectures, interviews with leading 3D printing experts, and hands-on self-study exercises. The results promise a solid understanding of 3D printing processes, the ability to operate the machine, and an awareness of its revolutionary potential. Important: only part of the training is free; to complete the course in full, you will have to pay 2,923 rubles. per month.
"Ecodesign for cities and suburbs"
University of British Columbia
Using examples of already implemented projects in the field of eco-design, students will be explained how ecology influences urban planning, why eco-design is important and how to ensure that cities and suburbs built in accordance with its principles become the generally accepted norm. Upon completion of the course, students will have the tools to make existing cities more livable. Particular attention will be paid to the design of cities and suburbs in conditions of climate change. The course is completely new, starts on April 4 and lasts six weeks.
"Cities of the Future"
ETH Zurich
Despite the fact that cities are developing differently in different parts of the world, all cities will change dramatically in the next few years, the lecturers of the course believe, researched in the field of urban design at the ETH Zurich. They propose to study the city as a complex anthropogenic mechanism with its own “metabolism”. Existing and new cities will be studied with a focus on Asia - according to preliminary data, the boom in the construction of new cities over the next 30 years will take place there. I promise to introduce students to the latest research and scientific developments in this area. The course lasts 10 weeks, no pre-registration is required.
Welcome to the country house design training center. Let's get acquainted. My name is Vitaly Zlobin, I am a practicing architect and head of a design company. I have two diplomas of higher architectural education and graduate school at the Moscow Architectural Institute, plus 10 years of experience as a practicing architect. I started as a humble architect's assistant and now lead a design team. Together we create projects for country houses, according to which builders build houses without delay or questions.
I have always been interested in optimization and automation of project activities. This allowed us to produce 4-5 individual complete projects of capital houses with an area of 200-500 sq.m. in a short period of time. per month, whereas the average architectural firm does no more than one or two.
I have compiled my experience into this website and various training programs. Dozens of students have already used them, gaining invaluable experience in creating country house projects. An algorithm for creating a country house project, tested by professionals, became available to students. Our website continues to be filled with interesting and useful information.
Don't forget to add me as a friend on Facebook.
Course presentation
Format: individual training.
Attention! The course is not suitable for collective purchase, because 30% of the information is given by the architect personally in individual work with the student. This is protection against piracy and takes into account the individual requirements of the student, who enters into an official contract before taking the course and receives a personalized certificate upon completion.
5 stages The course will teach you how to make country house projects for construction. You will know common mistakes. You will understand which algorithms are important in your work and study them. You will master the tools for creating a country house project already in the first stages of training. Each stage includes recorded lessons, handouts, group lessons and individual work with a teacher.
Attention!!! We teach the design of detached residential buildings with no more than three floors, intended for one family.
The course is designed for
1. Customers planning to build their own home.
Who knows better what your dream home should be like? Of course only you! So why can't you do the project? Control the costs of construction, foreman and workers?
If you don't know how to design a house yourself and save up to 500,000 rubles on design and construction, then right now you can go through the path of creating YOUR project from A to Z and see all the pitfalls together with an experienced architect. This will allow you to save up to 30% of the construction cost.
2. Interior designers.
Expand your professional competence and create country house projects yourself. Do you often have to work from a ready-made architectural project? And this is the framework for any design idea. After all, the architecture of the house (shape, style, materials) already dictates the concept of interior design.
If you have an architectural education, but you are engaged in interior design, you will not be able to complete a full-fledged country house project without practice. The course gives a 100% practical approach. Do your customers often inquire about house designs? I think yes. So answer them positively and start earning more from your services.
3. Builders.
Your knowledge and skills will be a good help for acquiring new knowledge and developing the skills of a practicing designer. Have you often had a customer ask about the possibility of developing a project, and you refused? Have you often had to build and finish without a project? If you could do projects yourself, it would solve a lot of problems. Build according to your projects and offer a full range of services to your clients.
In order to make sure whether you need or do not need this Course, answer the following questions:
Do you want to create your own country house project, made according to all the rules and standards?
Have you looked through a bunch of magazines and websites in search of beautiful houses, but in the end, came to the conclusion that they also need to be designed correctly?
Have clients approached you to design country houses?
Have you refused them because you doubted your abilities?
Do you do projects manually (draw according to the cells in a notebook), but would you like to own computer programs?
Do you know how to build a house, but don’t know how to complete the project according to all standards?
Do you lack the knowledge and skills to reach a higher level of country house design?
The course consists of the following stages
❖ Stage 1 ❖
Studying a program for creating layouts >>>
A powerful package for BIM design that combines the ability to create drawings with any degree of detail and create a 3D model. And all this without leaving one program! A user-friendly interface and a well-functioning design system will be understandable even to people who are far from creating country house projects (the current version is in the ArchiCAD 16 or 17 lessons).
In the ArchiCAD program you will learn drawing (creating layouts). You can easily arrange drawings in any format.
The result is the skills and abilities of fast and high-quality drawing:
After studying the 1st stage, you are guaranteed to be able to work in the field of design, making drawings of country houses. However, in order to learn how to create country house projects yourself, you need to go through the following stages of the course.
❖ Stage 2❖
Studying 3D modeling and visualization tools (creating photorealistic images) >>>
After you learn how to create layouts of country houses, you need to study the possibility of 3D modeling and a visualization package. Photorealistic images are the cover of your project; this is what customers look at first.
We continue to study ArchiCAD, but for 3D modeling:
Then Artlantis:
There is also a special opportunity to study:
It is inferior in capabilities to the ArchiCAD program (it is not a BIM design program), but wins in the simplicity and speed of creating a project. The program is more suitable for preliminary design. It allows you to quickly and efficiently create a 3D model of a country house and schematic drawings. And most importantly, it has a built-in Vray plugin for photorealistic rendering
Result:
After completing the 2nd stage, your arsenal will be significantly enriched. Now you can not only make drawings, but also create photorealistic images of projects.
❖ Stage 3 ❖
Basics of architectural design of cottages (creating an album with Draft Design drawings) >>>
In order for the customer to understand what his future home will be like, an album with a preliminary design is needed. In this project you advertise yourself: its individual design, content and the presence of your contact information - all this is the best business card for you and your business. This album displays all the information on a country house in the form of schematic images of the site plan, plans of all floors, sections, facades, as well as a selection of finishing materials. The stage is divided into large parts:
Part 1. Fundamentals of drawing in architectural design.
Part 2. House premises and algorithm for creating convenient layouts.
Part 3. Volume-spatial and structural modeling of a house.
Part 4. Rules for designing an album with a draft design of a country house.
Part 5. Scheme of the planning organization of the land plot (master plan diagram).
Result:
After passing 3rd stage, when within the framework of the stage you design your first country house, you will understand the entire logic of creating the project and are guaranteed to be able to carry out preliminary designs of country houses.
Once you know the composition of the project and the basics of design, you can go to a higher level and create premium class homes:
However, it will be difficult to build according to your drawings, because... working drawings of a country house are needed. You will learn how to perform them in the following steps.
❖ Stage 4❖
Specialization in design selection and calculations >>>:
- Wooden frame houses;
- Stone houses (foam block and brick houses).
The market is structured in such a way that it is more profitable for beginners to start working in one narrow design niche and achieve results in it. This way you have more chances to gain a foothold and find your target audience. Study the features of design in one or several of the most popular niches in Russia and the CIS countries and you are guaranteed to become a specialist in your chosen niche.
Specialization gives an in-depth understanding of a particular construction technology. The project must take into account all the design features of the technology. The type of foundations, wall thickness, span width, etc. depend on this. The material also affects the cost of the house and planning decisions. You have the opportunity to study two specializations.
This stage is under constant development. I record videos on new construction technologies, materials and calculations, and also conduct closed webinars.
Structure of the section with calculations of the 4th stage for 2017
Theoretical mechanics, structural strength and calculation of structures of country houses
- Fundamentals of theoretical mechanics (forces, moments, support reactions);
- Construction of calculation schemes (GNS, conditions of equilibrium of systems);
- Constructing diagrams of transverse forces;
- Construction of moment diagrams;
- Construction of diagrams of longitudinal forces;
- Calculation of statically determinate frames;
- Calculation of statically determinate multi-span beams;
- Calculation of sections of floor beams made of various materials;
- Calculation of sections of monolithic reinforced concrete floor beams;
- Calculation of the cross-section of columns made of various materials;
- Calculation of masonry walls made of various materials;
- Analysis of soil conditions for the foundation of a country house;
- Calculation of strip foundations;
- Calculation of pile-grillage foundations;
- Calculation of slab foundations;
- Collection of loads in country houses.
This also includes calculations of building structures country houses. If you know how to implement them, then your design solutions will be valued tens of times more.
See an example of calculating wooden floor beams and roof rafters.
❖ Stage 5❖
Project for the construction of a country house (creation of an Album with working drawings) >>> .
So, you own design programs and know how to create a preliminary design of a country house using various construction technologies. Now it's time to learn how to create a working project for a country house. These are the drawings that builders receive and according to which they build a country house.
Result (approximate amount of documentation):
An example of the implementation of our working project for a house in the village. Maryino, 2014 (click to enlarge)
The stage is currently closed for individual sales. It will be available only to those who complete the first four stages and show good results in design. I will personally select students.
Structure of the 5th stage for 2017
Part 1. Section AR (architectural solutions)
- The meaning of the working draft of the AR section (project tasks, the boundary between other sections);
- What materials do we take from the preliminary design to the working design?
- Rules for the preparation of a working draft of the AR section;
- General data of the AR section (list of drawings of the main set, explanatory note, technical specifications);
- Masonry plan and marking plan (hatching of materials, axis references, 3 types of dimensional chains, marking the floor, explication of premises, links to explication of floors, symbols, instructions for carrying out work, links to nodes);
- Construction sections (degree of detail: structures of walls, floors, ceilings, roofs, etc., shading of materials, axes, setting elevation marks, multi-layer structures, symbols, instructions for conducting work, links to nodes);
- Orthogonal projections of facades in B/W graphics and color (degree of detail of facades, shadow casting, finishing materials, marking of elevations, marking of windows and doors, exit of ventilation ducts and chimneys, symbols);
- Roof plan (degree of detail of the roof, roof slopes, roof eaves connections, outlet of ventilation ducts and chimneys, placing elevation marks, marking of dormer windows, symbols, drainage system, notes);
- Ventilation ducts (design of ventilation ducts, placing elevation marks, roof access units);
- Explication of floors (symbols, design of floors, calculation of the area of floor coverings);
- Installation diagram for filling window and door openings (symbols, list of windows and doors);
- List and specification of jumpers (design of jumpers, types of jumpers, symbols);
- Nodes and fragments in the AR section (tasks of nodes and fragments, symbols).
- System for making changes to an architectural project.
Part 2. Section KR (design solutions)
- The meaning of the working draft of the CD section (project objectives, boundaries between other sections);
- The need to divide the working draft of the KR section into subsections: QOL and CD;
Subsection of the working draft of the KR – KZh section (reinforced concrete structures):
- Rules for the preparation of a working draft of the QOL section;
- General data of the QOL section (list of drawings of the main set, explanatory note, instructions for the work);
- Development of a foundation plan (graphical representation of foundation types, setting of axes, setting of dimensional chains, setting of elevation marks, shading of materials, drawing of sections along the foundation, demonstration of the drainage system);
- Development of sections for the foundation (symbols, shading of materials, setting elevation marks, demonstration of the drainage system, application of reinforcement, multilayer structures);
- Formwork plan for the foundation (tasks of the formwork plan, symbols, dimensional chains);
- Foundation reinforcement (methods of demonstrating reinforcement for different types of foundation: slab, monolithic strip, pile-grillage, reinforcement joints);
- Releases of reinforcement from the foundation (tasks of releases from the foundation, methods of demonstrating releases);
- Specification of materials for foundation construction (calculation rules, specification for foundation elements, specification for the entire foundation, steel cost sheet);
- Design of reinforced concrete columns (reinforcement, plan view, connection with reinforcement outlets, sections of columns);
- Construction of floors (types of floors in country houses, selection of floors);
- Layout plan for prefabricated reinforced concrete floors (symbols, selection of reinforced concrete products, specification for reinforced concrete products);
- Formwork plan for interfloor monolithic reinforced concrete floors (symbols, dimensional chains, demonstration of openings in the floor, sections);
- Reinforcement of interfloor monolithic reinforced concrete floors (methods of demonstrating reinforcement, joints of reinforcement);
- Construction of a monolithic reinforced concrete reinforced belt (tasks of the reinforced belt, plan of the reinforced belt, reinforcement, sections along the reinforced belt, calculation of materials and creation of specifications);
- Design of monolithic reinforced concrete beams (tasks of beams, reinforcement, sections along the reinforced belt, calculation of materials and creation of specifications);
- Design of monolithic reinforced concrete stairs (staircase plan, dimensional chains, section, types, principles of reinforcement, calculation of materials and creation of specifications);
- Construction of porches and terraces (types of porches and terraces, interface with the foundation structure, sections of porches and terraces, materials of porches and terraces).
Subsection of the working draft section KR - KD (wooden structures):
- Rules for the design of the working draft of the design documentation section;
- General data of the design documentation section (list of drawings of the main set, explanatory note, instructions for the work);
- Development of a plan for wooden floors (principles of constructing wooden floors, taking into account the structure of the house, demonstration of sections, specification of load-bearing elements of the floor);
- Development of a plan for the rafter system (principles of the design of the rafter system, the main elements of the rafter system, demonstration of elements on the plan, connection with the roof plan of the AP section, drawing sections);
- Sections according to the rafter system (tasks for sections according to the rafter system, demonstration of the main elements, setting elevation marks, designing multilayer structures (types of coatings and their fastenings), demonstrating ventilation ducts and chimneys, placing units);
- Specification of rafter system elements (specification for the entire scope of work and for individual elements of the house);
- Nodes and fragments of the rafter system (main nodes of the rafter system, elements fastening points, symbols);
- Development of unique elements of the rafter system using the example of a metal-wood truss;
- Design of canopies and canopies (main set of drawings, components and fragments, specification).
At the end of stage 5, everyone who passes is given an Album of technical solutions for designing country houses. The album contains ready-made drawings, diagrams, components, fragments and specifications for a detailed design of a country house. The album is transferred electronically for use in the ArchiCAD program. 
Our course is more than theory and practice
This scenario for your future work. Starting with such little things as the rules for drawing up drawings and ending with the study of programs in which you will create your own house project, our course will give you powerful design tool.
Moreover, this tool will allow you to create projects in a short time, which will give you a competitive advantage over other designers and even entire companies.
The best way to learn the material is to do it yourself. During the course, you will develop your own country house project. Even if you have your own plot of land and desire to create your own unique project country house, don't miss the opportunity to do it!
Main advantages of the course:
- You get how technical knowledge, so artistic skills;
- You can combine the knowledge gained in the course with any design programs;
- The training is based on unique architect training programs in design companies (emphasis on practice);
- During the course you receive guaranteed result- albums with your own projects (here’s your portfolio).
- You can take the course while you are in any corner of the globe!
Author and course presenter
- A man who connected his life with country architecture.
- Author and presenter of courses and trainings on designing country houses.
- Head of the design and construction organization HOMESPRO:
How much does it cost? - choose a program:
Is it expensive or not?
For customers who want to design their own house: compare the cost of training with the cost of designing a country house in companies - this is about 800-1200 rub/sq.m. In addition, do not forget that during the training you will gain invaluable experience and architectural and construction knowledge, which will allow you to control the entire construction process and not overpay.
For designers who want to learn how to design country houses: the price of training at an architecture and construction university is about 200-300 thousand rubles per year, multiply by 5-6 years of study and compare with the cost of our courses.
Obviously, the sooner you start taking the course, the it will be more profitable for you, because prices for expert knowledge in the field of suburban construction are growing every year.
Guarantees of training results
Official agreement
Training cannot begin without concluding a formal contract for any of the programs. The appendices to the agreement specify the phased structure and outcome of the training.
The Moscow Architectural Institute (state academy), continuing the traditions of the Moscow Architectural School, trains professional workers in architecture, urban planning and design of the architectural environment. Graduates receive broad, high-level professional training with specializations in the field of architecture of residential, public and industrial buildings and structures. organization of rural areas and urban planning structures, natural and urban landscapes, reconstruction, restoration and theory of architecture and design, temple architecture.According to the Federal State Educational Standard, training is carried out at three levels of higher education - bachelor's, master's and postgraduate degrees.
For each level, modern educational programs have been developed in which all departments of the institute are involved. The bachelor gets the opportunity to develop in practice any type of building, in all areas of professional activity from sketch searches to the implementation of master plans, volumetric and planning solutions, and defense in expert examination. Masters receive (possess) deeper professional skills in specific, narrower areas in the field of architecture and urban planning with the ability to further develop in theory, postgraduate study and in practice the most popular and promising global trends in the field of transforming the human living environment.
Since 2015, the development of joint master's programs has begun with a number of Russian and foreign universities. Training in a broad profile is combined with specialization in the master's program in the departments: Architecture of residential buildings, Architecture of public buildings, Architecture of industrial structures, Urban planning, Restoration and Reconstruction, Architecture of rural populated areas, Landscape architecture, Theory and history of architecture, Design of the architectural environment, Temple architecture. The qualifications obtained after completing the MARCHI master's program are equivalent to a Master of Architecture degree abroad and allow young graduates of the institute to work as professional architects and designers.
The Moscow Architectural Institute (state academy) conducts educational activities in the following areas of training:
- 070301 Architecture Bachelor
- 070303 Architectural environment design bachelor
- 070401 Architecture Master
- 070404 Urban Planning Master
- 052320 Theory and history of architecture, restoration and reconstruction of historical and architectural heritage (postgraduate student)
- 052321 Architecture of buildings and structures. Creative concepts of architectural activity (graduate student)
- 052322 Urban planning, planning of rural settlements (postgraduate student)
- 070601
- FPK
- Preparatory Department of Moscow Architectural Institute
- Continuing education program to prepare for admission to Moscow Architectural Institute
At MARCHI, education is conducted in Russian full-time education:
Qualifications: B
Profiles: architectural design, urban planning,
landscape design, restoration design
Qualification:
Direction of training: 070303 - Design of the architectural environment
Qualification: B Bachelor, study period 5 years, (I stage)
Direction of training: 070404 - Urban planning
Qualification: Master, period of study 2 years, (II stage)
and part-time (evening) form:
Areas of training: 070301 / 070401 - Architecture
Qualifications: B Bachelor, period of study 5 years and 6 months, (I stage)
Qualification: Master, period of study 2 years and 3 months, (II stage)
Budget education
Accessibility of facilities and services in the field of education for people with disabilities.
The Moscow Architectural Institute is equipped with the necessary equipment and conditions to provide a comfortable living environment for people with disabilities. MARCHI has appointed those responsible for instructing specialists working with people with disabilities, and employees
who, by the nature of their activities, can contact people with disabilities on issues related to ensuring the accessibility of objects and services in the field of education for people with disabilities.
| BUDGET EDUCATION PROGRAMS | PAID EDUCATIONAL SERVICES | OPEN EDUCATION |
| 1st STAGE - BACHELOR'S DEGREE | DAY PREPARATION COURSES | PRE-UNIVERSITY EDUCATION |
| 2nd STAGE - MASTER'S DURATION | EVENING PREPARATION COURSES | ARCHITECTURAL EDUCATION |
| 3 STAGE - GRADUATE PROGRAM | GRADUATE SCHOOL OF ENVIRONMENTAL DESIGN | POST-GRADUATE EDUCATION |
|
| HIGH SCHOOL OF LANDSCAPE ARCHITECTURE AND DESIGN | OLYMPICS |
|
| COMPUTER DESIGN COURSES |
|
|
| TRAINING CENTER "URBANISTICS" |
|
|
| ADVANCED PROFESSIONAL COURSES FPK MARCHI |
|